4G LTE Dual sim Active Standby Failover Router VPN Function
Specification of this 4G LTE Dual sim Active Standby Failover Router VPN Function
YF360D-L 4g lte router is one industrial Dual-SIM WIFI ROUTER,it is failover router with VPN function and high quality, provides large data transmission function by public network.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect device
s to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect device
s to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.
It has been widely used on M2M fields, such as intelligent transportation, Substation ATM KIOSK, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post,
- weather, and so on.
- Design for Industrial Application
- High-powered industrial cellular module
- High-powered industrial 32bits CPU
- Adapt dual sim design to ensure the stable and reliable of the router
- Support low-consumption mode, including sleep mode, scheduled online/offline mode, scheduled power-on/power-off mode(optional)
Housing: iron, providing IP30 protection.
- Power range: DC 5~35V
- Stability and Reliability
- Support hardware and software WDT
- Support auto recovery mechanism, including online detect, auto redial when offline to make router always online
- Ethernet port: 1.5KV magnetic isolation protection
- RS232/RS485/RS422 port: 15KV ESD protection
- SIM/UIM port: 15KV ESD protection
Power port: reverse-voltage and overvoltage protection
- Antenna port: lightning protection(optional)
- Standard and Convenience
- Support standard RS232(or RS485/RS422), Ethernet and WIFI port that can connect to serial, Ethernet and WIFI devices directly
- Support standard WAN port and PPPOE protocol that can connect to ADSL directly
- Support intellectual mode, enter into communication state automatically when powered
- Provide management software for remote management
Support several work modes
- Convenient configuration and maintenance interface(WEB or CLI)
- High-performance
Support master card and smart card double link switching function
- Support multiple WAN access methods, including static ip, DHCP, L2TP, PPTP,PPPOE, 4G. LTE/
- 3G/HSPA+
- Support double link backup between LTE/ WCDMA and WAN(PPPOE, ADSL) (optional)
- Support VPN client(PPTP, L2TP, OPENVPN, IPSEC and GRE)
- Support VPN server(PPTP, L2TP, OPENVPN, IPSEC and GRE)
- Support local and remote firmware upgrade,import and export configure file.
- Support NTP, RTC embedded.
- Support multiple DDNS provider service.
- Support VLANs, MAC Address clone, PPPoE Server
- WIFI support 802.11b/g/n. support AP, client, Adhoc, Repeater, Repeater Bridge and WDS(optional) mode.
- WIFI support WEP,WPA,WPA2 encryption, Support RADIUS authentication and MAC address filter.
- Support multi online trigger ways, including SMS, ring and data. Support link disconnection when timeout
- Support APN/VPDN
- Support DHCP server and client, firewall, NAT, DMZ host , URL block, QoS, ttraff,statistics, real time link speed statistics etc.
- Full protocol support , such as TCP/IP, UDP, ICMP, SMTP(optional), HTTP, POP3(optional), OICQ(optional), TELNET, FTP(optional), SNMP, SSHD, etc.
Schedule Reboot, Schedule Online and Offline, etc.Support GPS function (Optional)
Parameters of this | |
4g lte Dual sim active standby Failover Router vpn function | Cellular Specification |
Cellular Module | Industrial cellular module |
Standard and Band | |
LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20 (2100/1900/1800/1700/850/2600/900/800MHz) | |
FDD: B2/B4/B5/B13/B17/B25/B26 (Optional), B1/B2/B3 /B5/B7/B8/B20/B28 (Optional) | |
LTE TDD: B38/B39/B40/B41 | |
HSPA+/HSUPA/HSDPA/WCDMA/UMTS 2100/1900/900/850MHz | EDGE/GPRS/GSM 1900/1800/900/850MHz |
Bandwidth | |
LTE(DL:150Mbps,UL:50Mbps) | |
HSPA+: 21Mbps(Download speed) 5.76Mbps(Upload speed) | |
HSUPA:5.76Mbps(Upload speed) | |
HSDPA:7.2Mbps(Download speed) | |
UMTS:384Kbps (DL/UL) | |
CDMA2000 1X EVDO: 3.1Mbps(DL)/1.8Mbps(UL) | |
EDGE: 236.8Kbps(DL/UL) | GPRS: 85.6Kbps |
TX power | <23dBm |
RX sensitivity | |
<-93.3dBm | GPS Specification (Optional) |
Item | Content |
GPS Module | Industrial GPS module |
Receiver Type | |
50-channel | |
GPS L1(1575.42MHz)C/A code | |
SBAS: WAAS,EGNOS,MSAS,GAGAN | Support GALILEO |
Max. update rate | 4 Hz |
Accuracy | |
Position: 2.5m CPE | SBAS: 2.0m CPE |
Acquisition | |
Cold starts: 29S | |
Warm starts: 29S | |
Aided starts: <1S | Hot starts: <1S |
Sensitivity | |
Tracking: -160dBm | |
Reacquisition: -160dBm | Cold starts: -144dBm |
Timing accuracy | |
RMS: 30ns | |
99%: <60ns | Granularity: 21ns |
Time pulse | |
Configurable, 0.25 to 1000Hz | WIFI Specification |
Item | Content |
Standard | IEEE802.11b/g/n |
Bandwidth | |
IEEE802.11b/g: 54Mbps (max) | IEEE802.11n: 150Mbps (max) |
Security | |
WEP, WPA, WPA2, etc. | WPS (optional) |
TX power | 20dBm(11n),24dBm(11g),26dBm(11b) |
RX sensitivity | |
<-72dBm@54Mpbs | Hardware System |
Item | Content |
CPU | Industrial 32bits CPU |
FLASH | 16MB(Extendable to 64MB) |
SDRAM | |
128MB | Interface type |
Item | Content |
WAN | 1 10/100 Mbps WAN port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
LAN | 4 10/100 Mbps Ethernet ports(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
Serial | |
1 RS232(or RS485/RS422) port, 15KV ESD protection | |
Data bits: 5, 6 ,7, 8 | |
Stop bits: 1, 1.5(optional), 2 | |
Parity: none, even, odd, space(optional), mark(optional) | Baud rate: 2400~115200 bps |
Indicator | "Power", "System", "Online-1", "Online-2", " Local Network ", "WAN", "WIFI", "Signal Strength" |
Antenna | |
Cellular: 2 Standard SMA female interface, 50 ohm, lighting protection(optional) | WIFI: 1 Standard SMA male interface, 50 ohm, lighting protection(optional) |
SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection |
Power | Standard 3-PIN power jack, reverse-voltage and overvoltage protection |
Reset | |
Restore the router to its original factory default settings | Power supply |
Item | Content |
Standard Power | DC 12V/1.5A |
Power range | |
DC 5~36V | Consumption |
Working condition | Consumption |
Standby | 290~340mA@12VDC |
Communication | 335~572mA@12VDC |
Schedule Shutdown | |
2.57~4.2mA@12DVC | Physical Characteristics |
Item | Content |
Housing | Iron, providing IP30 protection |
Dimensions | 206x135x28 mm |
Weight | |
790g | Environmental Limits |
Item | Content |
Operating Temperature | -35~+75ºC(-31~+167℉) |
Storage Temperature | -40~+85ºC (-40~+185℉) |
Operating Humidity
95% ( unfreezing) | Selection and Ordering Data |
Model No. | Description |
YF360D-L | 4G LTE FDD Router |
YF360D-LT | 4G LTE TDD Router |
YF360D-H | 3G HSPA+/HSUPA/WCDMA/UMTS Router |
YF360D-EV | CDMA2000 EVDO Router |
YF360D-E | EDGE Router |
YF360D-G



GSM/GPRS RouterPictures of this 4G LTE Dual sim Active Standby Failover Router VPN Function
Application of this
4g lte Dual sim active standby Failover Router vpn function
YF360D Series Cellular Dual-SIM WIFI ROUTER is a kind of cellular terminal device that provides large data transmission function by public UMTS/HSDPA/HSUPA/HSPA+/LTE network.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422), Ethernet and WIFI port that can conveniently and transparently connect devices to a cellular network, allowing you to connect to your existing serial, Ethernet and WIFI devices with only basic configuration.

It has been widely used on M2M fields, such as intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post, weather, and so on.Our Factory of this