3g 4g bonding modem router for M2M industrial use
Specification of this 3g 4g bonding modem router for M2M industrial use
R200-L/L is a dual sim dual band router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution ma
- nagement systems, metering etc. Software-defined, multi-carrier networking, dual SIM models, 802.11n/802.11ac and global 2.5G/3G/HSPA+/LTE options make it easy to get connected. With DIN-rail mounting
- , wide operating temperature range, and IP30 metal housing, R200 is a convenient yet reliable solution for any industrial wireless applications.
- Advanced Failover: Maximizes uptime by seamlessly switching between the multiple Internet interfaces (cellular, WAN, WIFI, dual-SIM).
- Multiple Tunneling Schemes: Secure your data using a variety of VPN tunneling schemes, including IPSec, L2TP, PPTP, OpenVPN and GRE.Ethernet, serial and I/O for connecting diverse field assets.
- Flexible WIFI: 802.11b/g/n(2.4GHz) and 802.11ac(5GHz) dual-band WIFI, configurable WIFI as WAN or access point, WIFI Security (WEP / WPA / WPA2 Mixed Mode) and multiple SSID.
- Gigabit Ethernet ports
.
| Remote Manager provides mass configuration, device management, OTA update, and troubleshooting tools. | Parameters of this 3g 4g bonding modem router for M2M industrial use |
| CELLULAR WAN • Supported Frequency Bands | |
| -- LTE FDD: B1, B2, B3, B4, B5, B7, B8, B20, B28 | |
| -- LTE TDD: B38, B39, B40, B41 | |
| -- WCDMA: 2100(B1), 1900(B2), 850(B5), 900(B8) | |
| -- EV-DO/CDMA: 800(BC0) | |
| -- GSM/GPRS/EDGE: 850/900/1800/1900 | • Automatic SIM based network operator switching |
| HOST INTERFACES | |
| • 10/100/1000 Base-T RJ45 Ethernet port | |
| • RS-232 or RS-485 Serial Console Port | |
| • 3 SMA antenna connectors (WIFI and Double-cellular) | |
| • Active GPS antenna support (option) | • (6) pin 3.5mm terminal block |
| INPUT/OUTPUT | |
| • (6) pin 3.5mm terminal block. | |
| • (2) DI, (1) DO, (1) Relay. | |
| • Input ON Voltage: 5 to 30 VDC. | |
| • Input OFF Voltage: 0 to 3 VDC. | |
| • Output < 50mA @ 30VDC. | • Relay:1A 250VAC/30VDC |
| LAN | |
| • DNS, DNS Proxy | |
| • DHCP Server | |
| • IP Passthrough (option) | |
| • VLAN | |
| • Host Interface Watchdog | • PPPoE |
| SERIAL | |
| • TCP/UDP PAD Mode | |
| • Modbus (ASCII, DTU, Variable) | |
| • PPP | • Reverse Telnet |
| EVENTS ENGINE (Option) | |
| • Custom event triggers and reports. | |
| • Configurable interface, no programming. | |
| • Event Types: Digital Input, Network Parameters, Data Usage, Timer, Power, Device Temperature. |
| • Report Types: TCP, UDP, SMS, SNMP Trap, HTTP, JSON. | • Event Actions: Drive Relay Output. |
| WIFI | |
| • IEEE802.11 ac, compatible IEEE 802.11 b/g/n. | |
| • AP and client mode. | |
| • Adjustable output power (Max: 26dBm) | |
| • Access point for up to 30 clients | |
| • Simultaneous access point/client mode | • WEP, WPA-PSK, WPA2-PSK etc. Security |
| NETWORK AND ROUTING | |
| • Network Address Translation (NAT) | |
| • Port Forwarding | |
| • Host Port Routing | |
| • VRRP | |
| • Reliable Static Route | • Dynamic DNS |
| VPN | |
| • IPSec, GRE, and OPENVPN Client | |
| • Up to 10 concurrent tunnels | |
| • Split Tunnel | |
| • Dead Peer Detection (DPD) | |
| • Multiple Subnets | • VPN Failover |
| SECURITY | |
| • Remote Authentication | |
| • DMZ | |
| • Inbound and Outbound Port filtering | |
| • Inbound and Outbound Trusted IP | • MAC Address Filtering. |
| GPS (Option) | |
| • Antenna Interface: SMA Female, 50 ohms impedance | |
| • Tracking Sensitivity: better than -144 dBm | |
| • Horizontal position accuracy: 2.5 m | |
| • Time-To-First-Fix: 29 s | • Protocol: NMEA-0183 V2.3 |
| OPERATION ENVIRONMENT | |
| • Operating Temperature: -35°C to +75°C / -31°F to +167°F |
| • Storage Temperature: -40°C to 85°C / -40°F to 185°F | • Humidity: 90% RH @ 60°C |
| MANAGEMENT SERVICE | |
| • Secure cloud-based device management application | |
| • Remote provisioning | |
| • Gateway configuration and template management | |
| • Configurable monitoring and alerting | |
| • Software and radio module firmware updates | • Auto configuration |
| DIMENSIONS | |
| • Housing & Weight: Metal, 520g |
| • Dimension: (L x W x H): 133 x 115.7 x 45 mm | • Installation: 34.6 mm Din-Rail or wall mounting or desktop |
| MANAGEMENT INTERFACES | |
| • Web-Based User Interface | |
| • Device Configuration Templates | |
| • Software and radio module firmware updates | |
| • AT Command Line Interface (Telnet/SSH/Serial) |
• SMS Commands (Option)
| • SNMP | Selection and Ordering Data |
| Model No. | Description |
| R200-H | Cellular (WCDMA/HSDPA/HSUPA/HSPA+), WIFI, SIM*1(Expandable to 2), I/O(2*DI, 1*DO, 1*Relay.) , GPS(Option) |
| R200-L | Cellular (LTE), WIFI, SIM*1(Expandable to 2), I/O(2*DI, 1*DO, 1*Relay.) , GPS(Option) |
| R200-H/H | Cellular (WCDMA/HSDPA/HSUPA/HSPA+, Dual-Module), WIFI, SIM*2, I/O(2*DI, 1*DO, 1*Relay.) , GPS(Option) |
R200-L/L
Cellular (LTE, Dual-Module), WIFI, SIM*2, I/O(2*DI, 1*DO, 1*Relay.) , GPS(Option)
Pictures of this 3g 4g bonding modem router for M2M industrial use
Application of this 3g 4g bonding modem router for M2M industrial use
R200 is an intelligent cellular router designed for industrial applications requiring faultless connectivity. It provides a secure, reliable, real-time, remote connectivity for SCADA, distribution man
Téléphone
Enquête