4G LTE cellular industrial router GRE
Specification of this 4G LTE cellular industrial router GRE
YF310 Series Cellular ROUTER is a kind of cellular terminal device that provides large data transfer function by public GPRS/EDGE/UMTS/HSDPA/HSUPA/HSPA+/LTE network.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422) and Ethernet port that can conveniently and transparently connect one device t
o a cellular network, allowing you to connect to your existing serial and Ethernet devices with only basic configuration.
It adopts high-powered industrial 32-bits CPU and embedded real time operating system. It supports RS232 (or RS485/RS422) and Ethernet port that can conveniently and transparently connect one device t
o a cellular network, allowing you to connect to your existing serial and Ethernet devices with only basic configuration.
It has been widely used on M2M fields, such as self-service terminal, intelligent transportation, smart grid, industrial automation, telemetry, finance, POS, water supply, environment protection, post
, weather, and so on.
*High-powered industrial 16/32 bits CPU
*Support hardware and software WDT
*Provide management software for remote management
*Support VPN client and sever (PPTP, L2TP, OPENVPN, IPSEC and GRE) *Full protocol support, such as TCP/IP, UDP, ICMP, SMTP, HTTP, POP3, OICQ, TELNET, FTP, SNMP, SSHD, etc.
Parameters of this
| 4G LTE cellular industrial router GRE | Cellular Specification |
| Item | Content |
| Cellular Module | Industrial cellular module |
| Standard and Band | |
| LTE FDD: B1/B2/B3/B4/B5/B7/B8/B20 (2100/1900/1800/1700/850/2600/900/800MHz) | |
| FDD: B2/B4/B5/B13/B17/B25/B26 (Optional), B1/B2/B3 /B5/B7/B8/B20/B28 (Optional) | |
| LTE TDD: B38/B39/B40/B41 | |
| HSPA+/HSUPA/HSDPA/WCDMA/UMTS 2100/1900/900/850MHz | EDGE/GPRS/GSM 1900/1800/900/850MHz |
| Bandwidth | |
| LTE(DL:150Mbps,UL:50Mbps) | |
| HSPA+: 21Mbps(Download speed) 5.76Mbps(Upload speed) | |
| HSUPA:5.76Mbps(Upload speed) | |
| HSDPA:7.2Mbps(Download speed) | |
| UMTS:384Kbps (DL/UL) | |
| CDMA2000 1X EVDO: 3.1Mbps(DL)/1.8Mbps(UL) | |
| EDGE: 236.8Kbps(DL/UL) | GPRS: 85.6Kbps |
| TX power | <23dBm |
RX sensitivity
| <-93.3dBm | Hardware System |
| Item | Content |
| CPU | Industrial 32bits CPU |
| FLASH | 16MB(Extendable to 64MB) |
DDR2
| 128MB(Extendable to 256MB) | Interface type |
| Item | Content |
| Ethernet | 1 10/100 Mbps Ethernet port(RJ45), auto MDI/MDIX, 1.5KV magnetic isolation protection |
| Serial | |
| 1 RS232(or RS485/RS422) port, 15KV ESD protection | |
| Data bits: 5, 6 ,7, 8 | |
| Stop bits: 1, 1.5(optional), 2 | |
| Parity: none, even, odd, (space, mark) (optional) | Baud rate: 2400~115200 bps |
| Indicator | "PWR", "SYS", "SIM", "Online", "ETH", “Signal Strength” |
| Antenna | Cellular: 2 Standard SMA female interface, 50 ohm, lighting protection(optional) |
| SIM/UIM | Standard 3V/1.8V user card interface, 15KV ESD protection |
| Power | Standard 3-PIN power jack, reverse-voltage and overvoltage protection |
Reset
| Restore the router to its original factory default settings | Power supply |
| Item | Content |
| Standard Power | DC 12V/1.5A |
Power range
| DC 5~36V | Power consumption |
| Working state | Power consumption |
| Standby | 103～115mA@12VDC |
| Working | 278～305mA@12VDC |
Timing shutdown
| 3.15~3.70mA@12DVC | Physical Characteristics |
| Item | Content |
| Housing | Iron, providing IP30 protection |
| Dimensions | 100x97x25 mm |
Weight
| 320g | Environmental Limits |
| Item | Content |
| Operating Temperature | -35~+75ºC（-31~+167℉） |
| Storage Temperature | -40~+85ºC (-40~+185℉) |
Operating Humidity
| 95% ( unfreezing) | Selection and Ordering Data |
| Model No. | Description |
| YF310-L | 4G LTE FDD Router |
| YF310-LT | 4G LTE TDD Router |
| YF310-H | 3G HSPA+/HSUPA/WCDMA/UMTS Router |
| YF310-EV | CDMA2000 EVDO Router |
| YF310-E | EDGE Router |
YF310-GGSM/GPRS Router
Pictures of this 4G LTE cellular industrial router GRE
Our Factory of this 4G LTE cellular industrial router GRE
Téléphone
Enquête